Author Topic: Assemblies - Nesting Assemblies should work  (Read 1658 times)

0 Members and 1 Guest are viewing this topic.

Offline KuhnsTopic starter

  • Full Member
  • ***
  • Posts: 92
  • Country: us
  • Gender: Male
    • MacDonald-Miller
Assemblies - Nesting Assemblies should work
« on: Jul 23, 2013, 20:50:23 PM »
One should be able to "Nest" assemblies, meaning that one should be able to take off an assembly WITHIN another assembly.

This would allow us to take off a room, which contains a Water Closet, Sink, VAV Box, Med Gas Outlet, etc...Put all these separate assemblies into a "Mother" assembly called "ROOM", count the number of rooms & BAM, you are done with your assembly take-off!
Gene L. Kuhns, Jr. - LEED AP
Sr. Estimator, MacDonald-Miller
Seattle, WA
Fabrication 2016 ESTmep