Author Topic: Command and Function History  (Read 28281 times)

0 Members and 1 Guest are viewing this topic.

Offline AdminTopic starter

  • Administrator
  • Premier Member
  • *****
  • Posts: 1406
  • Country: gb
  • Gender: Male
Command and Function History
« on: Oct 20, 2014, 20:54:28 PM »
Frequently, users require to establish at what version a particular command or function was introduced or removed.

We have introduced a page which provides those details. Further information will be added in the future (CAMduct, etc.).

http://www.xtracad.com/forum/index.php/page,History2.html

Thanks to Darren Young  for suggesting and providing the information.
I do NOT offer support to forum postings via email, IRC or any form of instant messaging network. If you want help, ask here!

Offline AdminTopic starter

  • Administrator
  • Premier Member
  • *****
  • Posts: 1406
  • Country: gb
  • Gender: Male
Re: Command and Function History
« Reply #1 on: Oct 21, 2014, 12:49:19 PM »
CAMduct DPL Post Processor History (Decoiler) has now been added.
I do NOT offer support to forum postings via email, IRC or any form of instant messaging network. If you want help, ask here!

Offline Dan Christensen

  • Full Member
  • ***
  • Posts: 117
  • Country: us
  • Gender: Male
Re: Command and Function History
« Reply #2 on: Oct 21, 2014, 17:31:48 PM »
Bravo Darren!

Offline AdminTopic starter

  • Administrator
  • Premier Member
  • *****
  • Posts: 1406
  • Country: gb
  • Gender: Male
Re: Command and Function History
« Reply #3 on: Oct 21, 2014, 19:07:47 PM »
CAMduct VPL Post Processor History (Plasma, Router, Laser, Waterjet) has now been added.
I do NOT offer support to forum postings via email, IRC or any form of instant messaging network. If you want help, ask here!

Offline AdminTopic starter

  • Administrator
  • Premier Member
  • *****
  • Posts: 1406
  • Country: gb
  • Gender: Male
Re: Command and Function History
« Reply #4 on: Mar 01, 2015, 20:06:03 PM »
Page reformatted for easier reference.

CADmep FabViewer Command History currently being has now been added.
I do NOT offer support to forum postings via email, IRC or any form of instant messaging network. If you want help, ask here!

Offline cadbyken

  • Premier Member
  • *****
  • Posts: 5076
  • Country: us
  • Gender: Male
Re: Command and Function History
« Reply #5 on: Mar 02, 2015, 13:14:26 PM »
See you are getting ready for 2016.

Also, can you pin this?  Keep forgetting this is available.
Ken Taylor - Atlantic Constructors, Inc
Database Manager/ITM content creator but normally working on Mech pipe systems
Revit - not ready for Primetime given all of the add-ons, work arounds, and general issues with Fabrication in Revit.  Tired of them taking our money for little results.

Offline AdminTopic starter

  • Administrator
  • Premier Member
  • *****
  • Posts: 1406
  • Country: gb
  • Gender: Male
Re: Command and Function History
« Reply #6 on: Mar 02, 2015, 13:41:16 PM »
Also, can you pin this?  Keep forgetting this is available.

There is a permanent link on the right hand side of several pages in the Additional Content box.
I do NOT offer support to forum postings via email, IRC or any form of instant messaging network. If you want help, ask here!

Offline AdminTopic starter

  • Administrator
  • Premier Member
  • *****
  • Posts: 1406
  • Country: gb
  • Gender: Male
Re: Command and Function History
« Reply #7 on: May 14, 2015, 20:56:28 PM »
CADmep AutoLISP Functions updated for 2016 release.
No functions removed.
One new function added - addtextatpoint.

Thanks to Darren Young for providing the updated information.
I do NOT offer support to forum postings via email, IRC or any form of instant messaging network. If you want help, ask here!

Offline AdminTopic starter

  • Administrator
  • Premier Member
  • *****
  • Posts: 1406
  • Country: gb
  • Gender: Male
Re: Command and Function History
« Reply #8 on: May 17, 2015, 21:14:07 PM »
CADmep Command History updated for 2016 release.
No commands added.
One command removed - compress.

Thanks to Darren Young for providing the updated information.
I do NOT offer support to forum postings via email, IRC or any form of instant messaging network. If you want help, ask here!

Offline AdminTopic starter

  • Administrator
  • Premier Member
  • *****
  • Posts: 1406
  • Country: gb
  • Gender: Male
Re: Command and Function History
« Reply #9 on: May 18, 2015, 11:34:52 AM »
CADmep FabViewer Command History updated for 2016 release.
No additions or omissions.

Thanks to Darren Young for providing the updated information.
I do NOT offer support to forum postings via email, IRC or any form of instant messaging network. If you want help, ask here!

Offline AdminTopic starter

  • Administrator
  • Premier Member
  • *****
  • Posts: 1406
  • Country: gb
  • Gender: Male
Re: Command and Function History
« Reply #10 on: May 18, 2015, 16:16:31 PM »
CAMduct VPL Post Processor History (Plasma, Router, Laser, Waterjet) updated for 2016 release.

Some clarification added regarding name changes.

Thanks to Darren Young for providing the updated information.
I do NOT offer support to forum postings via email, IRC or any form of instant messaging network. If you want help, ask here!

Offline cnash

  • Premier Member
  • *****
  • Posts: 1315
  • Country: us
  • Gender: Male
    • William R. Nash Companies
Re: Command and Function History
« Reply #11 on: May 18, 2015, 16:38:17 PM »
I noticed that there was a FabViewer one, but nothing for ESTmep. I know the FabViewer and ESTmep used to share basically all the same commands but that has since changed (for example: Many of the deleted commands in FabViewer are still available in ESTmep such as ALIGNSCALE/AS.)

Is there an intent to update this with ESTmep commands as well?
Christopher Nash
VDC Content Manager/Support
William R. Nash Companies

Offline AdminTopic starter

  • Administrator
  • Premier Member
  • *****
  • Posts: 1406
  • Country: gb
  • Gender: Male
Re: Command and Function History
« Reply #12 on: May 18, 2015, 17:06:18 PM »
I noticed that there was a FabViewer one, but nothing for ESTmep. I know the FabViewer and ESTmep used to share basically all the same commands but that has since changed (for example: Many of the deleted commands in FabViewer are still available in ESTmep such as ALIGNSCALE/AS.)

Is there an intent to update this with ESTmep commands as well?

Well, I just formulated information supplied to me in .xls format (by Darren Young) to make it accessible via the site.
I don't have ESTmep so can't help there but would be willing to do the same if someone wants to provide the information.

I suppose really it's something that would already need to be a work in progress by somebody to have recorded changes through any previous versions (or have access to all those versions to be able to check).

Looking at what Darren has supplied to date I can appreciate how much work goes in to compiling such data but if anybody has the time and the means...
I do NOT offer support to forum postings via email, IRC or any form of instant messaging network. If you want help, ask here!

Offline AdminTopic starter

  • Administrator
  • Premier Member
  • *****
  • Posts: 1406
  • Country: gb
  • Gender: Male
Re: Command and Function History
« Reply #13 on: May 18, 2015, 19:39:12 PM »
CAMduct DPL Post Processor History (Decoiler) updated for 2016 release.

Thanks to Darren Young for providing the updated information.
I do NOT offer support to forum postings via email, IRC or any form of instant messaging network. If you want help, ask here!

Offline cadragon

  • Senior Member
  • ****
  • Posts: 423
  • Country: us
  • Gender: Male
Re: Command and Function History
« Reply #14 on: Sep 22, 2015, 14:06:25 PM »
Hi Admin,

Another Lisp function added to 2016 was GetTextPos which returns a 3d point of the indexed text.

Reference: AutodeskĀ® Fabrication CADmepā„¢ 2016 release notes.