« previous next »
Pages: [1]   Go Down

Author Topic: CREATECAM doesn't export unistrut supports  (Read 4245 times)

0 Members and 1 Guest are viewing this topic.

Offline Challenger71Topic starter

  • Full Member
  • ***
  • Posts: 198
  • Country: us
  • Gender: Male
CREATECAM doesn't export unistrut supports
« on: Aug 12, 2015, 19:12:24 PM »
I am trying to see my unistrut bracing on this system in Revit and when I do a createcam and import it into Revit, none of the unistrut bracing shows up.

Is there another command to export to Revit or a setting I need to change?
Logged

Offline cadbyken

  • Premier Member
  • *****
  • Posts: 5475
  • Country: us
  • Gender: Male
Re: CREATECAM doesn't export unistrut supports
« Reply #1 on: Aug 12, 2015, 19:53:22 PM »
There are only several things that it will export.  There is some documentation on what it will export.  I remember flex being one that doesn't.
Logged
Ken Taylor - Atlantic Constructors, Inc
BIM Technology & Database Manager
Revit - not ready for Primetime given all of the add-ons, work arounds, and general issues with Fabrication in Revit.  Tired of them taking our money for little results.

Offline davidratx

  • Premier Member
  • *****
  • Posts: 1415
  • Country: us
  • Gender: Male
Re: CREATECAM doesn't export unistrut supports
« Reply #2 on: Aug 12, 2015, 19:55:00 PM »
There are a few CID patterns not supported yet but 838 is not on that list. I am able to convert my Unistrut just fine.
Logged
David Ronson
TDIndustries Director of Construction Technologies
Windows 10 - Revit - AutoCAD - CADmep - ESTmep - CAMduct - GTP Stratus

Offline Challenger71Topic starter

  • Full Member
  • ***
  • Posts: 198
  • Country: us
  • Gender: Male
Re: CREATECAM doesn't export unistrut supports
« Reply #3 on: Aug 12, 2015, 20:23:29 PM »
The CID on the unistrut I have is 910
Logged

Offline davidratx

  • Premier Member
  • *****
  • Posts: 1415
  • Country: us
  • Gender: Male
Re: CREATECAM doesn't export unistrut supports
« Reply #4 on: Aug 12, 2015, 21:15:05 PM »
Quote from: Challenger71 on Aug 12, 2015, 20:23:29 PM
The CID on the unistrut I have is 910
That is a structural CID and is not yet supported. More importantly, build your supports from 838. In the mean time, isolate all your CID 910 items and IFC them out so you can get them into Revit.
Logged
David Ronson
TDIndustries Director of Construction Technologies
Windows 10 - Revit - AutoCAD - CADmep - ESTmep - CAMduct - GTP Stratus

Offline Challenger71Topic starter

  • Full Member
  • ***
  • Posts: 198
  • Country: us
  • Gender: Male
Re: CREATECAM doesn't export unistrut supports
« Reply #5 on: Aug 14, 2015, 13:52:28 PM »
So IFC makes a block that Revit can read?  New to the whole Revit thing.   
Is there a way to do a global change to what I have now?  Match Properties doesn't have CID in it unfortunately.
Logged

Offline davidratx

  • Premier Member
  • *****
  • Posts: 1415
  • Country: us
  • Gender: Male
Re: CREATECAM doesn't export unistrut supports
« Reply #6 on: Aug 14, 2015, 14:08:58 PM »
IFC is a platform neutral open file format not controlled by any specific vendor or platform.

Unfortunately, there is not going to be an easy button for swapping 910 for 838 and MatchProp is not meant to handle these types of exchanges. You'll have to do it the manual way. Or you can just leave it as is and implement 838 on the next floor or project.
Logged
David Ronson
TDIndustries Director of Construction Technologies
Windows 10 - Revit - AutoCAD - CADmep - ESTmep - CAMduct - GTP Stratus

Offline Challenger71Topic starter

  • Full Member
  • ***
  • Posts: 198
  • Country: us
  • Gender: Male
Re: CREATECAM doesn't export unistrut supports
« Reply #7 on: Aug 14, 2015, 14:15:10 PM »
Thanks. It's always the bugs to work out when learning the in and outs of a new software.
Logged

Offline VirtualPilot

  • Premier Member
  • *****
  • Posts: 6824
  • Country: us
  • Gender: Male
Re: CREATECAM doesn't export unistrut supports
« Reply #8 on: Aug 14, 2015, 15:34:16 PM »
This is still in it's infancy, while is great that we can now work in REVIT with Fabrication, it will be a few years before is 100% implemented and who know, maybe even better...
Logged
Santos Cedeno
Pre-Production Mgr - DIXIE Metal Products

Offline Challenger71Topic starter

  • Full Member
  • ***
  • Posts: 198
  • Country: us
  • Gender: Male
Re: CREATECAM doesn't export unistrut supports
« Reply #9 on: Aug 17, 2015, 18:39:27 PM »
I did and IFCE and it exported it out as a *.BIX file. When I go to Revit, that file extension doesn't show up as one as I can import.
Logged

Offline davidratx

  • Premier Member
  • *****
  • Posts: 1415
  • Country: us
  • Gender: Male
Re: CREATECAM doesn't export unistrut supports
« Reply #10 on: Aug 17, 2015, 18:50:36 PM »
Quote from: Challenger71 on Aug 17, 2015, 18:39:27 PM
I did and IFCE and it exported it out as a *.BIX file. When I go to Revit, that file extension doesn't show up as one as I can import.
When you do the export change the extension to .ifc
Logged
David Ronson
TDIndustries Director of Construction Technologies
Windows 10 - Revit - AutoCAD - CADmep - ESTmep - CAMduct - GTP Stratus
Pages: [1]   Go Up
« previous next »