Author Topic: Selectrun not picking up hangers on same run.  (Read 1495 times)

0 Members and 1 Guest are viewing this topic.

Offline burlbed87Topic starter

  • Active Member
  • **
  • Posts: 32
  • Country: us
  • Gender: Male
Selectrun not picking up hangers on same run.
« on: Dec 07, 2017, 19:17:56 PM »
Here's the issue: Fabrication 2017 & 2018

Whether the hangers on the same service are manually placed on pipe in the same service or using design line to place hangers, when using the command "selectrun", the command no longer highlights all the hangers on the same run. In 2014, selectrun picked all the hangers on the same run. So, if one needed to raise a branch, the person would just select run and move all the pipe and hangers in one fell swoop. Can't do in Fabrication 2017 & 2018. Is there a new setting? Old CIDs?

You get out what you put in.

Offline SSchmitt85

  • Full Member
  • ***
  • Posts: 63
  • Country: us
  • Gender: Male
Re: Selectrun not picking up hangers on same run.
« Reply #1 on: Dec 09, 2017, 18:40:37 PM »
As far as i know - this has never worked. also when you revdesign a run - you get the same result. the hangers are not include in the run you select.
~Therapy is expensive.... But popping bubble wrap is cheap and effective~

Offline steam_fitter

  • Active Member
  • **
  • Posts: 16
  • Country: us
  • Gender: Male
Re: Selectrun not picking up hangers on same run.
« Reply #2 on: Dec 11, 2017, 19:46:57 PM »
SR was working in 2015, for most of our hangers.

We used blocks on our roller and J-hangers, and it wouldn't work on those.

Now, in 2017 it doesn't work on any of them.

I was also wondering if there is a new setting or if it's broken.

Offline bparrell

  • Premier Member
  • *****
  • Posts: 8819
  • Country: us
  • Gender: Male
Re: Selectrun not picking up hangers on same run.
« Reply #3 on: Dec 11, 2017, 20:55:12 PM »
Could be the switch for process supports separately is broke. Just a guess.
The SoCAL (VERY OLDMAN NOW) Kid! LOOKING FORWARD TO MORE  HOLIDAYS BOB  ::) ::)  
WIN 10 O.S
Revit/Fabrication 2022/BDSU 2022
RUDOLPH and SLETTEN
MEP COORDINATOR

Offline mmafan

  • Active Member
  • **
  • Posts: 1
  • Country: us
  • Gender: Male
Re: Selectrun not picking up hangers on same run.
« Reply #4 on: Mar 06, 2018, 16:59:10 PM »
Any updates on this issue?