Fabrication in Revit® > Fabrication Parts in Revit®
Revit/Fabrication thermometer
edsharp:
Howdee
looking for a thermometer that works in revit and fabrication, i have a nice one i made in fabrication but doesn't work in revit
Thanks Ed Sharp
cnash:
Following up on this and seeing if anyone knows of a pattern that can do this?
madcad:
You could do that easily with CID#1110.
If you add a round connector it should respect the material specification OD but it is currently broken since 2017 version.
I get round this using rectangular connection filleted on the appropriate sides with calc *0.5 of the width.
Use a round connector for the final connector of appropriate size.
Anything I have found that I cant find a pattern for CID#1110 is usually capable. I wish Autodesk would fix this.
CID#912 is also very flexible but it is also currently broken since 2017 version. Its connectors are all mixed up.
DonWunder:
Make a convert3dmodel of it.
cnash:
I made one with 912 and it seems to work, but it's odd.
I would prefer not to convert it since it will be a huge file size to be able to work in Revit.
The connectors do seem to have problems (errors when trying to place).
Navigation
[0] Message Index
[#] Next page
Go to full version