Author Topic: Attacher Service Mismatch Error  (Read 93 times)

0 Members and 1 Guest are viewing this topic.

Offline JAATopic starter

  • Full Member
  • ***
  • Posts: 119
  • Country: us
  • Gender: Male
Attacher Service Mismatch Error
« on: Aug 09, 2018, 06:30:04 PM »
So to revise a little less wordy.....the Attacher will not switch the service to what it is attached to. I found a post from back in 2009 with the same issue but no resolve was posted. This is mildly frustrating having to toggle the attacher off and on to update the service, or remember to change the active service in the dropdown before placing parts.
« Last Edit: Aug 10, 2018, 05:30:54 PM by JAA »
Intel Core i7-4771 CPU @ 3.50GHz, 32GB RAM
Nvidia QUADRO M4000 8GB
Building Design Suite Premium 2019, CADmep & CAMduct 2019

Offline JAATopic starter

  • Full Member
  • ***
  • Posts: 119
  • Country: us
  • Gender: Male
Re: Attacher Service Mismatch Error
« Reply #1 on: Aug 10, 2018, 05:34:55 PM »
Revised the long winded description......anyone have an idea?? literally started yesterday morning, what setting could have changed? It is only the duct-round and rectangular, piping works as before. Sure seems 2019 has been a little more buggy than previous versions.
« Last Edit: Aug 10, 2018, 05:39:49 PM by JAA »
Intel Core i7-4771 CPU @ 3.50GHz, 32GB RAM
Nvidia QUADRO M4000 8GB
Building Design Suite Premium 2019, CADmep & CAMduct 2019

Offline cadragon

  • Senior Member
  • ****
  • Posts: 412
  • Country: us
  • Gender: Male
Re: Attacher Service Mismatch Error
« Reply #2 on: Aug 10, 2018, 05:55:25 PM »
Database-->Takeoff-->CAD Settings-->General   

Is 'Switch the Active Tab with Attacher' checked?

Offline JAATopic starter

  • Full Member
  • ***
  • Posts: 119
  • Country: us
  • Gender: Male
Re: Attacher Service Mismatch Error
« Reply #3 on: Aug 10, 2018, 06:15:44 PM »
Yep, the very first thing I checked.
Intel Core i7-4771 CPU @ 3.50GHz, 32GB RAM
Nvidia QUADRO M4000 8GB
Building Design Suite Premium 2019, CADmep & CAMduct 2019