Author Topic: Has anyone found a fix for the O-let Issue?  (Read 226 times)

0 Members and 1 Guest are viewing this topic.

Offline cnashTopic starter

  • Premier Member
  • *****
  • Posts: 907
  • Country: us
  • Gender: Male
    • William R. Nash Companies
Has anyone found a fix for the O-let Issue?
« on: Oct 03, 2018, 09:03:27 PM »
Has anyone found a fix for the issue of O-Lets somehow breaking connectivity in Designline?

A lot of times when an O-let is on a line that line will have missing joints, missing hangers or misplaced joints/couplings.

This has been happening for a few versions and I'm not sure if it has ever been addressed.
Christopher Nash
Pre-Construction Coordinator
All things Database Management & Autodesk Product Support
William R. Nash Companies

Offline cnashTopic starter

  • Premier Member
  • *****
  • Posts: 907
  • Country: us
  • Gender: Male
    • William R. Nash Companies
Re: Has anyone found a fix for the O-let Issue?
« Reply #1 on: Oct 03, 2018, 09:10:49 PM »
Here is a picture example. I have changed the colors so it's easier to see. Pipe & Fittings in Grey, Joints in Yellow.
Top Example has O-lets, Bottom Example uses Tees.
Christopher Nash
Pre-Construction Coordinator
All things Database Management & Autodesk Product Support
William R. Nash Companies

Offline cnashTopic starter

  • Premier Member
  • *****
  • Posts: 907
  • Country: us
  • Gender: Male
    • William R. Nash Companies
Re: Has anyone found a fix for the O-let Issue?
« Reply #2 on: Oct 05, 2018, 01:23:51 PM »
Am I the only one? :'(
Christopher Nash
Pre-Construction Coordinator
All things Database Management & Autodesk Product Support
William R. Nash Companies

Offline dopefish

  • Full Member
  • ***
  • Posts: 101
  • Country: us
  • Gender: Male
Re: Has anyone found a fix for the O-let Issue?
« Reply #3 on: Oct 10, 2018, 05:46:31 PM »
You are not the only one. It also likes to break up straight pieces and add welds next to the olets which I end up having solve by erasing the pipe and stretching a new piece in. I think this issue has been a problem for a long time and has never been fixed.
"And the wood header is still 4  3/4" on top of the top of the double top plate." . . . Random VDC Coodinator

I love coordination

Offline audiocycle

  • Senior Member
  • ****
  • Posts: 427
  • Country: us
  • Gender: Male
Re: Has anyone found a fix for the O-let Issue?
« Reply #4 on: Oct 11, 2018, 01:27:58 PM »
What is your Button Mapping designation for the O-Let?

Our is P01, (with an Assembly Code) and I do not believe we are experiencing the Weld issue only the Hanger drop-out.
I believe the Hanger drop out is due to the PO1 indicates a piece of Pipe and therefore the branch connection is not seen as a Tee.

Barry
Intell(R) Core(TM) i7-3960X CPU @ 3.30GHz /32 GB of RAM
NVIDIA Quadro K5000 / Windows 7 Pro SP 1 /64 bit
Autodesk Building Design Suite Ultimate 2017 / Autodesk Fabrication CADmep 2017

Offline dopefish

  • Full Member
  • ***
  • Posts: 101
  • Country: us
  • Gender: Male
Re: Has anyone found a fix for the O-let Issue?
« Reply #5 on: Oct 11, 2018, 05:02:53 PM »
See pics.

Olet's1 es mui bueno

Olet's2 es el diablo

I think it's an issue of when you have a spacing between the olet's greater that the length of your pipe. I am using 40' pieces. instead of sacking them end to end it puts on connector next to the olet. I am also using an assembly but it does it with just O'lets as well. as far as the mapping I am using the ASTI pack with some modifications.
"And the wood header is still 4  3/4" on top of the top of the double top plate." . . . Random VDC Coodinator

I love coordination

Offline cnashTopic starter

  • Premier Member
  • *****
  • Posts: 907
  • Country: us
  • Gender: Male
    • William R. Nash Companies
Re: Has anyone found a fix for the O-let Issue?
« Reply #6 on: Oct 11, 2018, 08:05:41 PM »
What is your Button Mapping designation for the O-Let?

Our is P01, (with an Assembly Code) and I do not believe we are experiencing the Weld issue only the Hanger drop-out.
I believe the Hanger drop out is due to the PO1 indicates a piece of Pipe and therefore the branch connection is not seen as a Tee.

I have tried just Pipe (P01), O-Let and a script, both work the same it seems.
Christopher Nash
Pre-Construction Coordinator
All things Database Management & Autodesk Product Support
William R. Nash Companies

Offline audiocycle

  • Senior Member
  • ****
  • Posts: 427
  • Country: us
  • Gender: Male
Re: Has anyone found a fix for the O-let Issue?
« Reply #7 on: Oct 11, 2018, 08:42:07 PM »
What is your Button Mapping designation for the O-Let?

Our is P01, (with an Assembly Code) and I do not believe we are experiencing the Weld issue only the Hanger drop-out.
I believe the Hanger drop out is due to the PO1 indicates a piece of Pipe and therefore the branch connection is not seen as a Tee.

I have tried just Pipe (P01), O-Let and a script, both work the same it seems.

The images below is the "Assembly" and script & Typical Button Mapping for Pressure Piping.

Let me know if this helps.
Barry
Intell(R) Core(TM) i7-3960X CPU @ 3.30GHz /32 GB of RAM
NVIDIA Quadro K5000 / Windows 7 Pro SP 1 /64 bit
Autodesk Building Design Suite Ultimate 2017 / Autodesk Fabrication CADmep 2017

Offline dopefish

  • Full Member
  • ***
  • Posts: 101
  • Country: us
  • Gender: Male
Re: Has anyone found a fix for the O-let Issue?
« Reply #8 on: Oct 11, 2018, 09:34:06 PM »
So you don't get welds in weird spots with your button coding? even if u puts say 50' of pipe between the olets?
"And the wood header is still 4  3/4" on top of the top of the double top plate." . . . Random VDC Coodinator

I love coordination

Offline cnashTopic starter

  • Premier Member
  • *****
  • Posts: 907
  • Country: us
  • Gender: Male
    • William R. Nash Companies
Re: Has anyone found a fix for the O-let Issue?
« Reply #9 on: Oct 12, 2018, 01:05:35 PM »
No matter what I do ("assembly" scripts, no "assembly" scripts) I get joints in weird spots, missing joints, missing hangers, etc.
Christopher Nash
Pre-Construction Coordinator
All things Database Management & Autodesk Product Support
William R. Nash Companies