Author Topic: Work sheets not allowing me to edit them  (Read 409 times)

0 Members and 1 Guest are viewing this topic.

Offline lbenjaminTopic starter

  • Active Member
  • **
  • Posts: 4
  • Country: us
  • Gender: Male
Work sheets not allowing me to edit them
« on: Oct 18, 2018, 03:55:25 PM »
i am new to the making of the work sheets/reports. But for the last 2 days i have not been able to figure out why i cant click and drag items to the work sheet. I created a new sheet and everything. It still will not allow placement, nor can i make up a header or footer. Please help.

Lance

Offline VirtualPilot

  • Premier Member
  • *****
  • Posts: 6459
  • Country: us
  • Gender: Male
Re: Work sheets not allowing me to edit them
« Reply #1 on: Nov 09, 2018, 02:52:09 PM »
Do you have administrator rights to edit the reports?
Santos Cedeno
CAD/BIM Mgr - DIXIE Metal Products

Offline freshair

  • Active Member
  • **
  • Posts: 1
  • Country: us
  • Gender: Male
Re: Work sheets not allowing me to edit them
« Reply #2 on: Feb 07, 2019, 08:53:49 PM »
I just had the same problem, took me an hour to figure out I had to right click and use split vertical/horizontal before it would let me add data.  It only allows you to add one component per open area, and it seems no data if there are no split lines.

Offline VirtualPilot

  • Premier Member
  • *****
  • Posts: 6459
  • Country: us
  • Gender: Male
Re: Work sheets not allowing me to edit them
« Reply #3 on: Feb 08, 2019, 02:44:36 PM »
I just had the same problem, took me an hour to figure out I had to right click and use split vertical/horizontal before it would let me add data.  It only allows you to add one component per open area, and it seems no data if there are no split lines.

Yes, and you do have to do a lot of pre-design thinking before you start as the way this space splitting works sometimes yields very undesirable results...
Santos Cedeno
CAD/BIM Mgr - DIXIE Metal Products