(SSV) abbreviation in structural detail drawing

[bobqualls]

One note on the detail I'm working on says HSS6X4X1/4(SSV).  I know the first part identifies 6x4 square tube with a 1/4" wall.  I've been unable to learn what the (SSV) part is.  If anyone out there knows, please inform me.

[Darren Young]

My guess...installation orientation.....Short Side Vertical

This plan lists S.S.V. of HSS tube. It also lists in the notes LONG SIDE VERTICAL & HORIZONTAL SIDE VERTICAL with similar abbreviations.

https://augustablue.com/AugustaBlueprintPlanroom/addendum3web.pdf

Sheet S502

[Darren Young]

I think the reason you don't see it when searching on line is it's typically listed as "Long" instead of Short and/or "Leg" instead of "Side".

[bobqualls]

"                                                         "  (New emoji meaning my thanks can't be put in words.)

[Admin]

It can be clearly seen by the 4" dimension (as shown on the attached extract from an elevation on S502) that the steel is to be installed short side vertical.