Fabrication CADmep™ > CADmep™ Wish List

Attacher Arrow Alt+Rotation Degree Increments

(1/1)

frozen3:
Please omit the 15 degree increments and use 11.25 and 22.5 degree increments for the alt+attacher arrow rotation command.

We do not use 15/75 degree fittings.

dvenzor:
This may be true for Piping and Plumbing, but not for Duct.
It was written for Duct 1st, then plumbing, piping, etc. ..

Navigation

[0] Message Index