Author Topic: Elbow Gore Allowances  (Read 565 times)

0 Members and 1 Guest are viewing this topic.

Offline aloisiaraiTopic starter

  • Full Member
  • ***
  • Posts: 86
  • Country: us
  • Gender: Male
Elbow Gore Allowances
« on: Jun 12, 2019, 19:28:15 PM »
What pattern can I use to fab an elbow with an allowance on the gores similar to the attachment?

Offline JAA

  • Full Member
  • ***
  • Posts: 167
  • Country: us
  • Gender: Male
Re: Elbow Gore Allowances
« Reply #1 on: Jun 13, 2019, 16:29:57 PM »
CID#83 and the "allowance" is a connector you create that gets applied to the gores.
Intel Core i7-4771 CPU @ 3.50GHz, 32GB RAM
Nvidia QUADRO M4000 8GB
2022 Cad & Cam

Offline VirtualPilot

  • Premier Member
  • *****
  • Posts: 6735
  • Country: us
  • Gender: Male
Re: Elbow Gore Allowances
« Reply #2 on: Jun 19, 2019, 17:14:40 PM »
All elbows on Fabrication C1 is the connector between the gores...
Santos Cedeno
Pre-Production Mgr - DIXIE Metal Products