Author Topic: Hole Adjust - Cap  (Read 1198 times)

0 Members and 1 Guest are viewing this topic.

Offline ayakusTopic starter

  • Full Member
  • ***
  • Posts: 64
  • Country: us
Hole Adjust - Cap
« on: Jun 23, 2022, 14:23:56 PM »
Trying to figure out how to adjust the hole burned when we have a collar on an end cap, or collar on a linear diffuser plenum.  There is no option for hole adjust I've tried adding in the dynamic hole adjust on the connector with no luck.  Just want the hole to oversize by 1/8".  I also checked pattern options nothing seems helpful there.

Offline Jona

  • Full Member
  • ***
  • Posts: 236
  • Country: us
  • Gender: Male
Re: Hole Adjust - Cap
« Reply #1 on: Jun 28, 2022, 19:32:22 PM »
My best thoughts on this are :

1) use CID#26. For just an end cap select Not Cut on parts 1 and 2. (I have not spent the time to see if this can be script controlled or not).

2) Oversize the hole in opus.

3) Oversize the hole in item takeoff and train your guys that if the hole says 8-1/8'' that it's an 8'' collar.

Offline RickD

  • Full Member
  • ***
  • Posts: 85
  • Country: us
  • Gender: Male
Re: Hole Adjust - Cap
« Reply #2 on: Aug 04, 2022, 20:47:01 PM »
CID#31 is an end cap w/ an adjustable hole

Offline ayakusTopic starter

  • Full Member
  • ***
  • Posts: 64
  • Country: us
Re: Hole Adjust - Cap
« Reply #3 on: Aug 05, 2022, 14:09:32 PM »
CID#31 is an end cap w/ an adjustable hole

Thanks that works great.