Author Topic: Round collar seams will not change  (Read 880 times)

0 Members and 1 Guest are viewing this topic.

Offline mikehTopic starter

  • Active Member
  • **
  • Posts: 1
  • Country: us
  • Gender: Male
Round collar seams will not change
« on: Oct 06, 2022, 17:42:14 PM »
We are now using Cam2020 but I also had this issue with 2018.  Collar seams will come up as the spec has designated but I am unable to change it through the input screen.   If the spec has Acmelock and I change it to 1/2" lap or any other seam for that matter, it will always view/burn as Acmelock.   I do not have this issue with any of the other seams so I was wondering if there is something that needs to be clicked to work proper or something others are experiencing.  Thanks
             

Offline ScottieM

  • Premier Member
  • *****
  • Posts: 911
  • Country: us
  • Gender: Male
Re: Round collar seams will not change
« Reply #1 on: Sep 18, 2023, 18:14:36 PM »
I did a search, and this is as close anything else.

How do I change the collar seams on round ducts?

We're trying to get the collar seams to match the body seams on a reducer.

Scott M.
The Dude Abides

Offline Jona

  • Full Member
  • ***
  • Posts: 236
  • Country: us
  • Gender: Male
Re: Round collar seams will not change
« Reply #2 on: Sep 19, 2023, 17:41:17 PM »
If you're trying to change it from what your specification is calling out, then scripting is probably the only answer here.

Offline ScottieM

  • Premier Member
  • *****
  • Posts: 911
  • Country: us
  • Gender: Male
Re: Round collar seams will not change
« Reply #3 on: Sep 20, 2023, 12:06:23 PM »
I wasn't. It looks like collar seams are in the specifications.
We'll have to give that a look.
Thanks.
Scott M.
The Dude Abides