Author Topic: Round Access Panel won't match properties  (Read 2161 times)

0 Members and 1 Guest are viewing this topic.

Offline TonyHTopic starter

  • Active Member
  • **
  • Posts: 6
  • Country: gb
  • Gender: Male
Round Access Panel won't match properties
« on: Mar 17, 2023, 14:35:03 PM »
Hi,

I'm trying to clean up our ductwork database and am having trouble with Item 580, Round Access Panel.  When I try to match the Service Specification using Match Item Properties, it fails. 

The "Problem" box appears saying: "Unable to match Item Property "Item Specification".

If I right-click the Icon, the Specification and Insulation Spec are Not set and unlocked.  The Material and thickness is None and unlocked.

I've tried messing about with various settings, but fail every time.  Any ideas?

Offline TonyHTopic starter

  • Active Member
  • **
  • Posts: 6
  • Country: gb
  • Gender: Male
Re: Round Access Panel won't match properties
« Reply #1 on: Mar 20, 2023, 09:01:18 AM »
As an update guys.  CHSPEC works fine.

Offline craigjonnson

  • Senior Member
  • ****
  • Posts: 262
  • Country: au
  • Gender: Male
Re: Round Access Panel won't match properties
« Reply #2 on: Mar 21, 2023, 02:56:54 AM »
Hi Tony,

I would look at the Setup Services > service specification and see if its set to none.

Offline TonyHTopic starter

  • Active Member
  • **
  • Posts: 6
  • Country: gb
  • Gender: Male
Re: Round Access Panel won't match properties
« Reply #3 on: Mar 21, 2023, 09:45:52 AM »
Hi Craig,

Thanks for the response.  No joy I'm afraid.  the service is specified as per the attached image.

Offline VirtualPilot

  • Premier Member
  • *****
  • Posts: 6738
  • Country: us
  • Gender: Male
Re: Round Access Panel won't match properties
« Reply #4 on: Apr 03, 2023, 19:03:21 PM »
I see yours is looking like a hole, so, I am attaching ours for anyone to use, will look more like an access door...   ;)

Santos Cedeno
Pre-Production Mgr - DIXIE Metal Products