Author Topic: Fire Protection Terminals for Heads w/ Reducing Adapters  (Read 1261 times)

0 Members and 1 Guest are viewing this topic.

Offline ZTR88Topic starter

  • Full Member
  • ***
  • Posts: 79
  • Country: us
  • Gender: Male
I have an issue with a Flamegaurd Fire protection service where any terminal with a reducing head adapter will not populate unless the size of the head (1/2" or 3/4" MIP) matches the pipe size of the drop.

What I need to populate for example is a 3/4" drop pipe with a 3/4"x1/2" reducing head adapter and a 1/2" MIP sprinkler head.

I have the terminal type set to have the adapter populate "at terminal" and the head to populate "after terminal".

Anyone have any input on this that has dealt with reducing terminals before?
Zachary Reese
Virtual Design Coordinator / Database Manager
Douglas Orr Plumbing Inc.