XtraCAD.com

Fabrication in Revit® => Fabrication in Revit® Wish List => Topic started by: MSwanson on Apr 17, 2018, 19:22:46 PM

Title: Valve chart
Post by: MSwanson on Apr 17, 2018, 19:22:46 PM
We would like to number all the valves and create a tag on the shop drawings. then report the Valve info into a schedule to order Tags and print out at the end of the job to include a valve chart in the closeout documents.  Also this number should show up on the BOMs for the spool drawings so the shop can put the tag on the valve in the prefab stage of the project.