XtraCAD.com

General => General Discussions => Topic started by: cadbyken on Aug 27, 2018, 19:57:15 PM

Title: MEP Force 2018 - Austin Fabrication Forum
Post by: cadbyken on Aug 27, 2018, 19:57:15 PM
Who is here besides me?
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: davidratx on Aug 27, 2018, 22:45:37 PM
Who is here besides me?

Everyone, make sure to look me up.
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: SSchmitt85 on Aug 28, 2018, 15:03:17 PM
Some from Mtech is here.
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: cadbyken on Aug 31, 2018, 12:25:51 PM
Had a really good time.  Reminded me a lot of the old LVUGM meetings from years ago.  Nice size group and looking forward to the next one.
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: BradHendricks on Aug 31, 2018, 14:55:42 PM
Thanks to everyone who attended my first class! Had a great time down there! Just a better atmosphere and experience. Great to see everyone, most had the thought of, "Why attend AU when we have this?" and I agree.
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: kroberson on Aug 31, 2018, 16:47:35 PM
I am bummed that i missed out on this, I used to go the the old TSI usergroups and thought they were a good size group of people.  Is anybody going to AU this year that might want to connect?  Looking to get into some talks about reporting and database setup.  Looking for anyone that uses Fabrication for coordinating and fabricating sheet metal.  Message me if interested. 
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: bstacks on Aug 31, 2018, 20:08:22 PM
Had a really good time.  Reminded me a lot of the old LVUGM meetings from years ago.  Nice size group and looking forward to the next one.

I'm sorry we didn't get to hang out Ken, but thank you for coming. I hope it was the "good" stuff from the old UG minus the shady sales company stuff! I can't wait to see this event double in size next year. As I mentioned at the closing session, we will start calling for presenters in January if not sooner. I want to get the schedule posted earlier for the next one.
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: bstacks on Aug 31, 2018, 20:09:21 PM
Thanks to everyone who attended my first class! Had a great time down there! Just a better atmosphere and experience. Great to see everyone, most had the thought of, "Why attend AU when we have this?" and I agree.

Glad we finally got to meet Brad and thank you for supporting the event with a session!
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: cadbyken on Aug 31, 2018, 21:38:03 PM
Had a really good time.  Reminded me a lot of the old LVUGM meetings from years ago.  Nice size group and looking forward to the next one.

I'm sorry we didn't get to hang out Ken, but thank you for coming. I hope it was the "good" stuff from the old UG minus the shady sales company stuff! I can't wait to see this event double in size next year. As I mentioned at the closing session, we will start calling for presenters in January if not sooner. I want to get the schedule posted earlier for the next one.
Brett, no worries.  You are a busy man but I noticed I didn't get my M&Ms, blue only.  ;)
I had fun teaching a class but not sure how it went from the audience's perspective.  Trying to come up with ideas for next time as well.  Overall, Applied did a great job, specially since it was your first go around.  Can't wait until next time.
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: cadbyken on Aug 31, 2018, 21:39:41 PM
I am bummed that i missed out on this, I used to go the the old TSI usergroups and thought they were a good size group of people.  Is anybody going to AU this year that might want to connect?  Looking to get into some talks about reporting and database setup.  Looking for anyone that uses Fabrication for coordinating and fabricating sheet metal.  Message me if interested.
We are sending people but, honestly, we will more than likely be pairing back from AU in the future and concentrating on this event.  It is specific to what we do.
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: cyan on Sep 02, 2018, 02:04:08 AM
I had fun teaching a class but not sure how it went from the audience's perspective.  T

Which class did you teach? I know there was a good general session presentation by Limbach, curious if that was you. If so, as I just said, was pretty good. lol.
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: cadbyken on Sep 04, 2018, 12:19:29 PM
I had fun teaching a class but not sure how it went from the audience's perspective.  T

Which class did you teach? I know there was a good general session presentation by Limbach, curious if that was you. If so, as I just said, was pretty good. lol.
No, not me.  That was Richard Davidson, our national BIM manager.  I taught the Excel in Fabrication class on Wednesday morning. 

Richard did do a great job though. 

Looks like I missed several people from the forum there.  Always next year though.
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: bobcat09 on Sep 04, 2018, 14:51:37 PM
Had a good time at the event, I thought ASTI did a really good job for their first year. We will defiantly be going back next year.
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: cnash on Sep 04, 2018, 16:27:44 PM
It was a good event and can't wait for next year. Always good talking with all you (somewhat) like minded folk. ;)
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: cyan on Sep 05, 2018, 13:37:55 PM
I taught the Excel in Fabrication class on Wednesday morning. 

If I'm being honest, I didn't learn very much from that class.

Now you might say that some of that was because I wasn't in that class, but I would say that this is defensive reasoning.
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: cadbyken on Sep 05, 2018, 15:32:48 PM
If I'm being honest, I didn't learn very much from that class.

Now you might say that some of that was because I wasn't in that class, but I would say that this is defensive reasoning.

I...do...not...understand.... :o
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: cyan on Sep 05, 2018, 16:00:03 PM
It's not worth the brain damage for such a stupid joke, lol
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: cadbyken on Sep 05, 2018, 16:31:08 PM
It's not worth the brain damage for such a stupid joke, lol
lol, it actually hurt when I read it and then read it again, and again.
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: dopefish on Oct 10, 2018, 17:50:08 PM
How was MEP force? I had to choose between it and AU. With the lack of fab support at AU i may be inclined to change my mind next year.
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: Darren Young on Oct 10, 2018, 19:52:45 PM
If you want Fab related info...CAD/CAM/EST, Revit Fab Parts, eVolve Mech/Elect and associated technologies, definitely go to MEP Force. I'd imagine it'll only get better and it was good as it was. Has the vibe of the old TSI User Group days (minus the vendor/customer negativity and tension). Was the night before the event that a hallway conversation I had made the event worth while for me.

Judging from the difficulty I'm having finding help with my regular pool of folks that help in my labs, most (not all) of the folks I know are not going to AU this year at all or are sending a much smaller group. I'd say about 10% of the folks I run into each year are going this year based on conversations I've had. Most say MEP Force is what they'll be going to from now on.
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: cnash on Oct 10, 2018, 20:27:20 PM
If you want Fab related info...CAD/CAM/EST, Revit Fab Parts, eVolve Mech/Elect and associated technologies, definitely go to MEP Force. I'd imagine it'll only get better and it was good as it was. Has the vibe of the old TSI User Group days (minus the vendor/customer negativity and tension). Was the night before the event that a hallway conversation I had made the event worth while for me.

Judging from the difficulty I'm having finding help with my regular pool of folks that help in my labs, most (not all) of the folks I know are not going to AU this year at all or are sending a much smaller group. I'd say about 10% of the folks I run into each year are going this year based on conversations I've had. Most say MEP Force is what they'll be going to from now on.


This, exactly this!
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: jcravens on Oct 11, 2018, 18:23:19 PM
If you want Fab related info...CAD/CAM/EST, Revit Fab Parts, eVolve Mech/Elect and associated technologies, definitely go to MEP Force. I'd imagine it'll only get better and it was good as it was. Has the vibe of the old TSI User Group days (minus the vendor/customer negativity and tension). Was the night before the event that a hallway conversation I had made the event worth while for me.

Judging from the difficulty I'm having finding help with my regular pool of folks that help in my labs, most (not all) of the folks I know are not going to AU this year at all or are sending a much smaller group. I'd say about 10% of the folks I run into each year are going this year based on conversations I've had. Most say MEP Force is what they'll be going to from now on.

I agree with you Darren completely.  Applied did a great job on this event and will be going anytime it is ever offered.  Really enjoyed catching up with all you guys and gals.  That is what it is all about is the networking and learning little things here and there that you did not know.
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: jmerch on Oct 12, 2018, 13:08:49 PM
I agree! MEP Force was a great event. If this event keeps going, and Autodesk keeps NOT improving/fixing the software, we will keep attending MEP Force. Always good to network with you guys. I learn so much every time.
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: fishandchips on Nov 28, 2018, 19:29:52 PM
woulder, shouder, couldn'tver
 >:(
Title: Re: MEP Force 2018 - Austin Fabrication Forum
Post by: bstacks on Dec 17, 2018, 19:10:54 PM
Hi All,
Just a heads up that we are working on the next MEP Force event already. With a goal to double the attendance. Location will most likely be in San Antonio and in August again. Yes, I know it is hot, but at least we will be in another cool place ;) right off the river walk.

In order to keep this event going and strong, we really need speakers so please let me know if you are interested. It's a free registration if you do!

If you are not able to be a speaker, but you are able to join us then I'd still like to hear from you. Please provide me with feedback on the types of sessions you would like to see. My goal is to get the schedule posted much earlier this time to give you more time to register and sign up for the classes.