XtraCAD.com

Fabrication CADmep™ => CADmep™ Users => Topic started by: aloisiarai on Jun 12, 2019, 19:28:15 PM

Title: Elbow Gore Allowances
Post by: aloisiarai on Jun 12, 2019, 19:28:15 PM
What pattern can I use to fab an elbow with an allowance on the gores similar to the attachment?
Title: Re: Elbow Gore Allowances
Post by: JAA on Jun 13, 2019, 16:29:57 PM
CID#83 and the "allowance" is a connector you create that gets applied to the gores.
Title: Re: Elbow Gore Allowances
Post by: VirtualPilot on Jun 19, 2019, 17:14:40 PM
All elbows on Fabrication C1 is the connector between the gores...