Author Topic: Ductwork Transition Tag with Arrow  (Read 1076 times)

0 Members and 2 Guests are viewing this topic.

Offline Shaun1119Topic starter

  • Active Member
  • **
  • Posts: 45
  • Country: us
  • Gender: Male
Ductwork Transition Tag with Arrow
« on: Apr 18, 2024, 18:34:41 PM »
We have a transition tag that reads the set correctly. I have a left and right arrow in the tag as well. I have the arrows set with parameters. When I load the tag into the project, under graphics of the tag, the arrows left and right don't appear to where I can select them, only in the properties drop down i can select arrow left or right. Any idea what I am missing? Can I have these under graphics where it is just one tag and have the option to select right, left, or now arrow??

Thanks
Shaun

Offline craigjonnson

  • Senior Member
  • ****
  • Posts: 287
  • Country: au
  • Gender: Male
Re: Ductwork Transition Tag with Arrow
« Reply #1 on: Apr 22, 2024, 05:28:08 AM »
You can assign the visibility of the arrowhead to Left or Right within the family.
We have done the same thing. Ive attached the file "Revit 2020" for you to review and some screens shots on how this works.