KRoss
CAD Technician
Registered: 23-January-2007
Posts: 21
|
|
I am having an issue with designline not erasing 3D soemtimes and I have to manually erase the pipe and fittings. I then refill and it is okay for a while. I have this issue off and on but it is not on a real consistant basis. Not sure what I am doing to cause it. Sometimes is has been after an undo or two?
_______________________________________
KAR
BIM Specialist
CAD Technician
RHMC - St. Louis
|
|
| 20-July-2010 17:07:42 |
|
Bobby T
Senior Member
From: Franklin, TN
Registered: 03-October-2008
Posts: 133
|
|
I have had this problem in the paste. I think it is just a bug in the software. Sine it does not cause any errors in the drawing we just manually erase and go on. My guess is that it isn't high on the list of priorities to fix it.
_______________________________________
Dell T3400 Windows 7, 64 bit, Autocad 2010, CAD-MECH 2.40.52 Lock 19
Formal education will make you a living. Self education will make you a fortune.
|
|
| 20-July-2010 18:59:07 |
|
banderson25
Active Member
From: Chicago, IL
Registered: 15-February-2009
Posts: 17
|
|
Do you happen to be working with another sub who is using AutoCad MEP? I deal alot with an HVAC contractor that went with MEP/ East Coast CAD and whenever the his file sizes start to creep up I start having issues. MAP told me it could be causing our software to draw multiple objects on top of one another and once we use the erase3D command it only applies to the objects on top. No fix yet.
|
|
| 21-July-2010 02:59:50 |
|
ctrull
Active Member
Registered: 13-April-2007
Posts: 4
|
|
I have had this problem when I do an undo right after filling in 3D. Most of the time my hangers end up not erasing. I have also had problems with multiple objects on top of one another, but do not know how to catch that.
|
|
| 30-July-2010 15:34:30 |
|
Jump to
|
Powered by PunBB
© Copyright 2002-2007 Rickard Andersson
|
|
