Aaron 0927
Active Member
Registered: 10-March-2008
Posts: 22
|
|
Name: Aaron Johnson
Location: Denver Colorado
Occupation: Sheet Metal Cad Engineer Database Manager
Hobbies: Camping, Movies, Video Games, Fishing, Computers
I have been recently put in charge of the database and my first task was to completely revamp our database to match the standards the guys in the newly opened sheet metal shop. Its been a bit of a headacke but is coming alone nicely. Have used this forum to get help in alot of areas that were causing problems. Thanks again.
|
|
| 31-July-2008 13:43:38 |
|
KJHest08
Active Member
Registered: 26-August-2008
Posts: 7
|
|
Name: Kevin Hagen
Location: Madison, WI
Occupation: Sheet Metal Estimator
Interests: GOD (I pastor a small church), Family (My wife and six kids), Disk golf (I am an addict), Guitar (Love playing-not as good as I wish)
I am a new EST-DUCT user. My background is with QuickPen. The company I just started working for has used the CAD and CAM parts of the software but has not completely set up the EST portion or used it. That's is where I come in-A bit iverwhelming at first!
|
|
| 09-September-2008 14:36:49 |
|
paychriswhite
CAD Designer
 From: Las Vegas
Registered: 12-September-2008
Posts: 7
|
|
Name: Christopher White
Location: Las Vegas, NV
Occupation: CAD Designer
Interests: Off Roadin, Video Games, Autocad, Shooten, Hiken, Just about anything!
AIM: doobwarlock
E-MAIL: cwhite@qualitymechanical.com
Just wanted to say im glad to be aboard these forums... and feel free to aim me or hit me up to join an irc channel or whatever.
I'm currently using autocad and TSI to run plumbing & mpipe for Quality Mechanical. Anyone doing the same please add me on aim or let me know so we can exchange help!
-Chris
_______________________________________
Quality Mechanical Contractors, LLC
|
|
| 12-September-2008 18:18:41 |
|
emilioaxp
Active Member
Registered: 26-October-2007
Posts: 9
|
|
Name: Emilio Moreno
Location: Detroit, MI
Occupation: IT Supervisor (Started in Engineering)
Interests: Surfing, Soccer, Mountain Biking, Skating & Snowboarding,
|
|
| 18-September-2008 16:10:30 |
|
tuffyred
Senior Member
From: Sparks Nevada
Registered: 27-June-2008
Posts: 35
|
|
Name: Carrie Mclelland
Location: Sparks NV
Occupation: Sheetmetal Worker
|
|
| 26-September-2008 20:36:18 |
|
89links
Active Member
 From: Abingdon MD, United States
Registered: 30-September-2008
Posts: 8
|
|
Name: Sam Stamathis
Location: Baltimore, Maryland
Occupation: Mech Coord.
Interests: 4x4, Radio control, Guns, Bikes (Supermoto) and many other things which also drain whats left of my time and money
Great site lots of crucial info in a nice simple package not loaded down with ads...I have only about 10 months experience at this point in the field of mech/plumbling coordination and the comp. just started using Cad Mech, so here I am! Very useful program...I'm sure once I figure this monster out it will be a huge help over cadpipe.
_______________________________________
Sam S.
Commercial Cad
|
|
| 30-September-2008 16:50:04 |
|
jusali
Active Member
Registered: 24-September-2008
Posts: 1
|
|
Hello I'm new here supposed to be implementing Cadduct into our M&E team eek!
Name Jus
Location Bristol UK
Occupation CAD Technician
Interests My Wife & Kids, Wood craft, DJ'ing, Sculpture, Art
|
|
| 03-October-2008 16:15:20 |
|
Riaan Fourie
Active Member
Registered: 05-December-2008
Posts: 17
|
|
Name : Riaan Fourie
Location: South Africa
Occupation: HVAC CAD Manager & design draughtsman
Since i started draughting i wanted to go to 3D, but for years was stuck with 2D, my ship has hopefully come with CADMEP
|
|
| 05-December-2008 21:45:40 |
|
AprilNewland
CAD 3D design and coordination
 From: Nashville, TN
Registered: 30-October-2008
Posts: 136
|
|
Name: April
Location: Nashville, TN
Occupation: CAD Designer for Mechanical Contractor
A.A.S in Architectural Eng and soon to be (3 classes left) B.A.S in Architectural Engineering
New to TSI but about 8 years professional cad exp but if you count younger years when in college...LOL..over 10 years exp. LOVING THE 3D!
_______________________________________
Cad-Elec Lok 18
Win 7, 64 bit Xeon Processor 3.33 12 GB
Dual Nividia Quadro 4800 (1.5 g each)
|
|
| 09-December-2008 17:14:54 |
|
aleschper
CAD/CAM Operator
 From: Houston, Texas
Registered: 10-April-2008
Posts: 17
|
|
Name: Andrew Leschper
Location: Houston, Texas
Occupation: CAD and CAM Setup, maintanence and operation.
Interests: Spending Time with my family, watching football, playing video games (Madden Rocks)
Comments: Hope that I can give as well as get helpful info.
HOOKEM HORNS and
_______________________________________
Lock 18
Version 2.38.218
|
|
| 06-January-2009 17:51:22 |
|
gamosher
Draftsman
 From: Atlanta, GA
Registered: 01-November-2007
Posts: 6
|
|
Name: Greg Mosher
Location: Atlanta, Georgia
Ocupation: Sheet metal Draftsman
Interests: Family, Mountain biking
Last edited by gamosher (17-February-2009 12:42:21)
_______________________________________
Greg
2.38.218
Vista 64 Bit - AutoCAD Architecture 2010
|
|
| 17-February-2009 12:40:29 |
|
Outsider
Senior Member
Registered: 23-March-2005
Posts: 100
|
|
Name: Michael A. Rivera
Location: Phoenix, AZ
Occupation:Senior Pipe/Plumbing Designer
Interests:Family, Football ,Fishing
_______________________________________
CADDUCT 2.38.186
Dongle Lock 18
Architectural Desktop 2010/64 Bit
|
|
| 24-February-2009 12:49:53 |
|
lsm_drafter
Gator Hunter
 From: Sunny Orlando, Florida
Registered: 16-April-2008
Posts: 127
|
|
Name: Wilbur Mummey
Location: Orlando, FL
Occupation: Union Sheet Metal Mechanic, Cad Draftsman, Cad Manager, IT Manager, Overall Intra-office helpdesk manager
Interests: Fishing, golf, computers, customizing almost anything, fixing things (usually after I break them), and alligator hunting (hence the avatar). Not necessarily in that order.
_______________________________________
You've got to eat them before they eat you!
Version 2.38.186, Lock Code 17, AutoCAD 2011 x64
Windows Vista Business x64, Core2Duo 3.33ghz 8gb RAM
512mb NVidia Quadro 3700, Dual 22" Monitors
|
|
| 10-April-2009 17:47:50 |
|
jabowabo
Senior Member
 From: Tyler, Texas
Registered: 24-June-2009
Posts: 58
|
|
Name: Jason
Location: East Texas
Occupation: CAD Guy
Interests: Guitar, MMA, Gadgets, Info Junkie
Comment: Just completed a degree in Process Piping Design. I've also been teaching and administrating SmartPlant 3D and CADWorx software for the college. I'm starting a new job as the lone CAD guy for a small company that has just adopted CAD-Mech. This forum has been a great source of knowledge. A HUGE thanks to all posters!
_______________________________________
REL 2.38.218 {18}
i7-860 3.46GHz W7x64bit
16GB DDR3 ATI HD5850 1GB
MEP2010
|
|
| 13-July-2009 23:09:56 |
|
cycloneandy
Design Engineer
 From: Cedar Rapids, IA
Registered: 09-January-2008
Posts: 65
|
|
Name: Jerad Andersen
Location: Cedar Rapids, IA
Occupation: Lead CAD Project Manager
Interests: Music (mainly rock/metal), movies (all kinds), video games (yes, I was raised on video games), computers (I build computers for friends in my off hours)
_______________________________________
1. You can get it Good & Fast, but it won't be Cheap.
2. You can get it Cheap & Fast, but it won't be Good.
3. You can get it Good & Cheap, but it won't be Fast.
Remember there's always a choice!
|
|
| 14-July-2009 19:48:51 |
|
jcravens
Mech Designer / BIM 3d Modeling
 From: Tennessee
Registered: 12-August-2008
Posts: 33
|
|
Josh Cravens
Mechanical Designer / BIM 3d Modeling
Lee Company
Franklin, TN 37067
_______________________________________
Josh Cravens
Mechanical Designer / BIM 3d Modeling
Lee Company - Franklin TN
email: jcravens@leecompany.com
|
|
| 08-October-2009 20:03:21 |
|
Tindrafter
Active Member
From: Midwest
Registered: 28-July-2009
Posts: 2
|
|
Name: Mike Sneed
Location: Rockford, IL
Occupation: Sheet Metal Workers Local 219 CAD Manager
Interests: Jeep (http://jeepalliance.org/), Family, Just getting enough fun to make it through......
_______________________________________
Livin the dream --- Don't wake me up.
|
|
| 21-October-2009 14:12:57 |
|
glenn
Project Mangler
 From: Fairbanks, Alaska, USA
Registered: 24-June-2004
Posts: 21
|
|
OK...
Name: Glenn Brady, P.E.
Location: Fairbanks, Alaska
Occupation(s):
1) Local 23 Journeyman Sheet Metal Worker
2) Licensed Professional Mechanical Engineer (one who knows which end of a pump the crap comes out of!!)
3) Project Mangler
4) Owner/Founder of America's Most Northern Brewery... (yes, really!)
5) Official member of the 'big, bad liquor industry lobby'... (according to the bad guys, that is)
6) 2nd Generation HVAC/Mechanical Contracting business owner (been in for 32 years, but am only 38 yrs old now... you do the math...)
Interests:
1) Beer (of course)
2) More Beer (I keep beer in my office...)
3) Getting away from this damned computer!
Been using Autocad since the days of DOS, and Cad-Duct since the early days of parallel dongles... Doing some very cool stuff, with the help of ideas from other folks on this site... Currently suffering through Autocad MEP2010 x64 (glitches, anyone?), and NOT looking forward to Revit...
_______________________________________
W7 64-Bit / Autocad Revit/MEP Suite 2011 64-bit
Navisworks Review 2011 64-bit / Cad-Duct 2.40.036 18x64
|
|
| 06-November-2009 03:34:12 |
|
SteveM-MAP
International Sales & Marketing Manager
 From: UK
Registered: 23-October-2009
Posts: 1
|
|
Name: Steve Merry
Company: MAP Software
Position: International Sales & Marketing Manager
Location: UK
Just a quick introduction, I look after MAP's International sales & marketing. Always available to assist in anyway I can.
Best regards
Steve
_______________________________________
_____________________________________________________
MAP Software
smerry@map-software.com
www.map-software.com
|
|
| 12-November-2009 10:58:21 |
|
jmerch
CAD Coordination Manager
 From: Omaha, NE
Registered: 04-December-2009
Posts: 502
|
|
Name: Josh Merchant
Location: Omaha, NE
Occupation: CAD Coordination Manager (plus one other I will get into later)
Interests: Family, Hockey, Hunting, Fishing, Camping, CAD, Music, Movies, Beer, anything hands on (remodeling, new construction, etc.)
Comment: Spent 8 dedicated years as a mechanical designer for an engineering firm until I was laid off due to the economy. Landed a job as CAD coordination manager for a plumbing/hvac piping/process piping contractor. So far so good on the other side of the fence.
Last edited by jmerch (04-December-2009 16:01:46)
_______________________________________
REL 2.38.197 {18}
DELL T7500 - Dual Quad Core Xeon 3.33GHz - 24GB RAM - NVidia Quadro FX5800 - W7Ux64 - MEP2010 - NAVIS 2011
|
|
| 04-December-2009 14:37:30 |
|
hoax23
Crisis Management
From: Baltimore, Maryland
Registered: 15-January-2008
Posts: 52
|
|
Name: Shawn Sandridge
Location: Baltimore, Maryland
Occupation: Senior Project Coordinator/CAD Manager
Interests: Hunting, Fishing
|
|
| 07-December-2009 17:53:44 |
|
TFuller
Senior Member
 Registered: 16-October-2009
Posts: 149
|
|
Maybe I should have done this earlier.
Thomas N Fuller II
CAD-Duct Detailer / CAM-Duct Operator
SMWIA LU 20
Evansville, IN
Joined apprenticeship in 2004, had 2.5 years as pre-apprentice, 7 months as non-union helper.
Completed apprenticeship in 2009 with two International Contest wins and one third place finish.
Been laid off 11 times, worked for seven different union contractors, and I've eaten my fair share of fly ash at the powerplants.
Began my new position in October of 2009 with only the required one week of ACAD training from my third year (2007) of apprenticeship.
I also teach Intro to ACAD as an evening class for Local 20, and I'll soon be teaching CCS as well.
Oh yeah, and I play the pipes.
_______________________________________
Thomas N Fuller II
Industrial Contractors, Inc.
FAB-MEP, CAD-MEP, CAM-Duct 2.40.blahblah, Lock 19
|
|
| 11-March-2010 13:13:08 |
|
tintom606
Active Member
From: San Jose California
Registered: 19-April-2010
Posts: 3
|
|
Name: Tom Edwards
Location:San Jose California
Occupation: Unemployed sheetmetal worker/Green detailer
Schools:Autocad,Welding,PLC, Electronics, Refriceration,Cad-Duct various others
Union: smw 104 and smw 3 and 10 and 85 and 46 and 206 {hmm have I really been everywhere?}
Hobbies:motorcycles ,boats and women {to the dismay of my new wife lol}
Hello gents and ladies... A bit older at 46 but finally getting my act together
taken autocad and cad-duct classes twice and seem to be proficient... but very green... looking to relocate as there seem to be no oportunity for a green detailer here in the bay... funny the hall keeps telling me companies still need detailers..perhaps my approach is wrong... anyway anyone have a lead on a job..anyone .... anywhere??? by the way been a union sheet metal worker for 19 years certified welder for most of that {19gs} aws d1.1 aws d9.1 anyway looking foreward to the challenge of becoming a deatailer {perhaps even the headache}
I can be reached at 408-509-7399 Tom Edwards
Last edited by tintom606 (19-April-2010 22:06:23)
_______________________________________
Wish I Were Smarter
|
|
| 19-April-2010 21:53:07 |
|
DarrenMack
Active Member
Registered: 11-May-2010
Posts: 1
|
|
Name: DarrenMack
Location: Oakland CA
Occupation: SMW local 104 Sheetmetal worker
Interests: Currently going through training for Auto-Cad certification
|
|
| 11-May-2010 01:45:00 |
|
steven
Active Member
Registered: 20-April-2010
Posts: 2
|
|
Name: Steven
Location: North Bay, California
Occupation: Local 104 Sheet Metal Journeymen
|
|
| 11-May-2010 01:52:25 |
|
LOUIEISM
Active Member
From: California
Registered: 20-April-2010
Posts: 1
|
|
I am a new to AutoCAD and just getting started with CAD Duct. I have been involved in the Manufacturing and Installation of sheet metal products for 24 years. Local 104 East Bay Area is where I call home. Eager to learn more.
|
|
| 11-May-2010 01:59:09 |
|
doomhaas
Active Member
Registered: 20-April-2010
Posts: 1
|
|
name: jayme hargrave
location: oakland, ca
occupation: smw local 104 sheetmetal jouneyman
interests: expanding my trade knowledge to include more management/office skills
hobbies: loving life
hey everybody, recently found interest in autocad, been excelling in my classes and currently beginning my advanced class. looking forward to gaining a lot through the help of my classes and this forum. glad to be here!
|
|
| 11-May-2010 01:59:36 |
|
pcskillman
Active Member
From: california
Registered: 11-May-2010
Posts: 1
|
|
I'm tring to learn about Auto cad 2009&2010 to better understand raeding blue prints and try to understand how to draw with the computer as well as using a computer.
|
|
| 11-May-2010 02:01:30 |
|
cadbyken
Sleep....it is over-rated
 From: Deltona, FL
Registered: 18-March-2006
Posts: 2719
|
|
Welcome Guys,
Wow, there sure are a lot of you! Have fun. There is a lot of information here. Don't forget to use that search function. (It is a little tricky though.)
_______________________________________
Sometimes I feel like Obi Wan "Use the search function Newbie" but I am probably more like Jar Jar Binks
Helpful hints: http://www.xtracad.com/forum/viewtopic.php?id=3187
AutoCAD 2009: CAD Duct 2.37.163, Lock 16 <-- Old School 
Newer Computer (AMD Phenom II X4, 3.62 Ghz, 8GB Ram, Windows 7 64 bit, 1 GB video
|
|
| 11-May-2010 02:06:08 |
|
rtrittosr
Active Member
Registered: 20-April-2010
Posts: 1
|
|
Name: Randy Tritto
Location: San Leandro
Occupation: Cad-Duct detailer student
Goals: To become employed as an entry-level detailer and to be a productive member of a detailing team.
Interests: Family, biking, fishing, reading
|
|
| 11-May-2010 02:17:19 |
|
Jump to
|
Powered by PunBB
© Copyright 2002-2007 Rickard Andersson
|
|
